Skip to content
Energy efficiency

Fewer power peaks, lighter energy bills

OptiWatt monitors and manages the electricity use of commercial kitchens, hotels and other businesses: it spreads the loads, avoids peaks and lowers the contracted power.

0 kW
in use now
0
active panels
0 kWh
saved today
0 kW
in use now
0
active panels
0 kWh
saved today

Our goal

For years we have installed and serviced high-end professional cooking systems. That experience is the foundation of OptiWatt: hardware and software we develop ourselves to control the high electricity consumption of commercial businesses.

Savings

With OptiWatt you need less power from the grid operator: the connection cost goes down and, for a new business, the savings are substantial from day one.

Sustainability

Using energy better means wasting less of it: energy efficiency is one of the most effective ways to cut greenhouse gas emissions.

Versatility

It suits many kinds of business, it is quick to install and commission, and the results are immediate.

Where it works

Wherever many electrical appliances run at the same time and the available power is a constraint.

Restaurants, canteens and fast food

Restaurants, canteens and fast food

Hotels

Hotels

Laundries

Laundries

Gyms and wellness centres

Gyms and wellness centres

Indicative simulation

Savings simulator

Move the sliders and see how OptiWatt cuts power peaks over a typical day.

Your business

Power peak reduction
0%
Estimated saving on the bill
0%

This is an indicative simulation based on a typical catering profile: it is neither a quote nor a guarantee of results. Actual savings depend on the installation and the supply contract and are assessed during a site visit.

Request a site visit

Power peaks over 24 hours

Without OptiWatt With OptiWatt

Estimated hourly power over a typical day, without and with the limit managed by OptiWatt.

How we work

Four steps, from the first site visit to remote monitoring.

1. System analysis

Visit to the workplace.
Survey of the technical features of the installation and its components.
1
2

2. Consumption check

Check of how the appliances work today.
Detection of abnormal consumption by high resistive-load machines.

3. Savings proposal

Estimate of the achievable savings.
Tailored solution to bring consumption into line.
3
4

4. Installation and commissioning

Custom adaptations for existing appliances.
Installation and commissioning of the system.
Remote monitoring of consumption and faults.

What the installation needs

A few preparations by the electrical contractor, before we install the system.

Electrical panel

Voltage and current measurement in the main or zone panel (kitchen, laundry, wellness centre): current transformers (CTs) and a three-phase analyser, supplied by us, which talks to our controller.

Wiring

One cable from the control panel to each machine, in a star layout: shielded 4×0.50 mm² cable, readily available.

Power supply

A supply line in the panel, protected by a two-pole residual-current circuit breaker rated 6 A or 10 A.

Ready-to-connect machines

Where possible, machines prepared for optimisation, to be requested when ordering.

Network socket

One UTP network point, category 5e or 6.

Internet

Direct Internet access, for remote control and support.

Why install OptiWatt

When many appliances run at once, the power demand rises, and with it the fixed costs on the bill. OptiWatt coordinates consumption peaks and so lowers the contracted power and the bill.
Managing peaks and stabilising the electrical supply is the starting point for truly optimising consumption, in a shop or restaurant as much as in a factory.

Main benefits

Spots critical situations

Remote access and support (HMI and PLC)

Monitors how appliances are used (switch-ons, consumption) and misuse

Manages the power of the main panel or sub-panels

Adapts to the needs of each installation

Dedicated power threshold when the generator is running

Keeps the power demand down

Daily, weekly, monthly and yearly technical reports

Avoids works and digging to upgrade the supply lines

Dedicated power threshold with renewable-energy systems

Measures water, gas and the consumption of each appliance

Consumption charts available at any time

Why choose us

OptiWatt works in many sectors and the benefits are immediate: you already save on connection costs. And as installations become ever more electric, keeping power demand in check matters more every year.
Our technical team supports you from the quote to the handover of the system.

The software and its strategies

The software and its strategies

Latest-generation analysers measure the power drawn from the zone panel or right after the main meter.
The controller continuously compares this value with the set limit and adjusts its outputs in real time, switching loads on and off to stay below the threshold.
Up-to-date components

Up-to-date components

We keep a close eye on industry developments and use only latest-generation components, for a stable and reliable system.
Tailored solutions

Tailored solutions

The system can also measure water and gas and integrate control of inverters, air extraction and supply, technical alarms and critical thresholds.
Business partnerships

Business partnerships

Interest in energy savings keeps growing: we are building a local sales network and looking for technical-sales professionals to work with.

Technical documents

Diagrams and data sheets of the instruments we use, to download as PDF.

0
Satisfied customers
0
Systems installed
0
Metres of cable laid

Contact us

Write to us: we will reply with an initial assessment and, if needed, arrange a site visit.

OptiWatt Logo

+39 338 3754206
Roberto Dorigatti

We will use the data you send us only to answer your request. Privacy notice